Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 476

Page: 476 / 1022

Prefix:

PLAT

ID:

0170

User Response

No action; information only.

•

806f0313-1701ffff : A software NMI has occurred on system [ComputerSystemElementName].

(NMI State)

This message is for the use case when an implementation has detected a Software NMI.

May also be shown as 806f03131701ffff or 0x806f03131701ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0228

User Response

Check the device driver.

Reinstall the device driver.

3. Update all device drivers to the latest level.

4. Update the firmware (UEFI and IMM).

•

806f0322-1301ffff : Computer System [ComputerSystemElementName] is in Standby. (ACPI Power

State)

This message is for the use case when an implementation has detected a System went into Standby mode.

May also be shown as 806f03221301ffff or 0x806f03221301ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

462

Lenovo NeXtScale nx360 M5 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 476 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: