Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 606

Page: 606 / 1022

Alert Category

Critical - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0495

User Response

No action; information only.

•

81010901-3707ffff : Numeric sensor [NumericSensorElementName] going high (upper critical)

has deasserted. (HDD Outlet Temp)

This message is for the use case when an implementation has detected an Upper Critical sensor going
high has deasserted.

May also be shown as 810109013707ffff or 0x810109013707ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

Critical - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0495

User Response

No action; information only.

•

81010902-0701ffff : Numeric sensor [NumericSensorElementName] going high (upper critical) has

deasserted. (SysBrd 12V)

This message is for the use case when an implementation has detected an Upper Critical sensor going
high has deasserted.

May also be shown as 810109020701ffff or 0x810109020701ffff

Severity

Info

Serviceable

592

Lenovo NeXtScale nx360 M5 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 606 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: