Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 252

Page: 252 / 1022

Warning

Serviceable

Automatically notify support

Alert Category

System - Remote Login

SNMP Trap ID

CIM Information

Prefix:

IMM

ID:

0016

User Response

Complete the following steps until the problem is solved:

1. Make sure that the correct login ID and password are being used.

2. Have the system administrator reset the login ID or password.

•

40000011-00000000 : Security: Login ID: [arg1] had [arg2] login failures from CLI at [arg3].. ()

This message is for the use case where a user has failed to log in to a Management Controller from
the Legacy CLI.

May also be shown as 4000001100000000 or 0x4000001100000000

Severity

Warning

Serviceable

Automatically notify support

Alert Category

System - Remote Login

SNMP Trap ID

CIM Information

Prefix:

IMM

ID:

0017

User Response

Complete the following steps until the problem is solved:

1. Make sure that the correct login ID and password are being used.

2. Have the system administrator reset the login ID or password.

•

40000012-00000000 : Remote access attempt failed. Invalid userid or password received. Userid is

[arg1] from WEB browser at IP address [arg2]. ()

238

Lenovo NeXtScale nx360 M5 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 252 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: