Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 560

Page: 560 / 1022

•

806f070d-0409ffff : Rebuild in progress for Array in system [ComputerSystemElementName]. (1U

Storage HDD2)

This message is for the use case when an implementation has detected that an Array Rebuild is in
Progress.

May also be shown as 806f070d0409ffff or 0x806f070d0409ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0178

User Response

No action; information only.

•

806f070d-040affff : Rebuild in progress for Array in system [ComputerSystemElementName]. (1U

Storage HDD3)

This message is for the use case when an implementation has detected that an Array Rebuild is in
Progress.

May also be shown as 806f070d040affff or 0x806f070d040affff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0178

User Response

No action; information only.

546

Lenovo NeXtScale nx360 M5 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 560 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: