Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 334

Page: 334 / 1022

No action; information only.

•

80070101-0c01ffff : Sensor [SensorElementName] has transitioned from normal to non-critical

state. (Ambient Status)

This message is for the use case when an implementation has detected a Sensor transitioned to
non-critical from normal.

May also be shown as 800701010c01ffff or 0x800701010c01ffff

Severity

Warning

Serviceable

Yes

Automatically notify support

Alert Category

Warning - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0520

User Response

1. Make sure that the fans are operating, that there are no obstructions to the airflow (front and

rear of the server), that the air baffle is in place and correctly installed, and that the server cover
isinstalled and completely closed.

2. Check the ambient temperature. You must be operating within the specifications (see Server

Features and specifications for more information).

•

8007010d-0b01ffff : Sensor [SensorElementName] has transitioned from normal to non-critical

state. (RAID #1 Volume)

This message is for the use case when an implementation has detected a Sensor transitioned to
non-critical from normal.

May also be shown as 8007010d0b01ffff or 0x8007010d0b01ffff

Severity

Warning

Serviceable

Yes

Automatically notify support

Alert Category

320

Lenovo NeXtScale nx360 M5 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 334 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: