Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 489

Page: 489 / 1022

Replace the PCIe adapters.

Replace the riser card.

•

806f0507-0301ffff : [ProcessorElementName] has a Configuration Mismatch. (CPU 1)

This message is for the use case when an implementation has detected a Processor Configuration
Mismatch has occurred.

May also be shown as 806f05070301ffff or 0x806f05070301ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - CPU

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0062

User Response

1. Make sure that the installed microprocessors are compatible with each other.

2. (Trained technician only) Reseat microprocessor n.

3. (Trained technician only) Replace microprocessor n. (n = microprocessor number)

•

806f0507-0302ffff : [ProcessorElementName] has a Configuration Mismatch. (CPU 2)

This message is for the use case when an implementation has detected a Processor Configuration
Mismatch has occurred.

May also be shown as 806f05070302ffff or 0x806f05070302ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - CPU

SNMP Trap ID

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

475

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 489 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: