
2. Install the compute node into the chassis (see “Installing a compute node in a chassis” on page 105
for instructions).
3. If any Features on Demand (FOD) features are installed in the compute node, see the instructions in the
Lenovo Feature on Demand User's Guide
to reactivate these features. To download this document,
go to http://www.ibm.com/systems/x/fod/, log in, and click
Help
.
4. Update the Universal Unique Identifier (UUID) and the Vital Product Data (VPD). Use the Advanced
Settings Utility to update the UUID and VPD in the UEFI-based compute node (see “Updating the
Universal Unique Identifier (UUID)” on page 43).
5. Update the compute node with the latest firmware or restore the preexisting firmware (see “Updating
the firmware” on page 29 for more information).
Internal cable routing and connectors
This section provides information about routing the cables when you install some components in the Lenovo
NeXtScale nx360 M5 compute node.
The following notes describe additional information you must consider when you install or remove the cables:
• To remove the cables, slightly press the cables toward the planar tray; then, pull to remove the cables
from the connectors on the system board. Pulling the cable out of the connector by excessive force
might cause damage to the cable or connector.
• To connect the cables on the system board, press evenly on the cables. Pressing on one side of the cable
might cause damage to the cable or connector.
• Make sure that the cables are not pinched and do not cover any connector or obstruct any component
on the system board.
• Make sure that all cables above the power paddle card not crossing each other.
For more information about the requirements for cables and connecting devices, see the documentation
that comes with these devices.
Cabling hard disk drive with planar cable
The internal routing and connectors for the hard disk drive with planar cable.
The following illustrations show the internal routing and connectors for the hard disk drive with planar cable.
Note:
Make sure the relevant cables pass through the cable clips.
216
Lenovo NeXtScale nx360 M5 Installation and Service Guide
Summary of Contents for NeXtScale nx360 M5
