Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 333

Page: 333 / 1022

•

80030112-0601ffff : Sensor [SensorElementName] has asserted. (SMM Mode)

This message is for the use case when an implementation has detected a Sensor has asserted.

May also be shown as 800301120601ffff or 0x800301120601ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0508

User Response

1. Replace the power supply with higher rated power.

2. Reduce the total power consumption by removing newly added or unused option like drives or

adapters.

SMM Monitor :

•

8005010d-2b81ffff : Sensor [SensorElementName] has indicated limit exceeded. (FDIMM

TempLimit)

This message is for the use case when an implementation has detected a Sensor limit was exceeded.

May also be shown as 8005010d2b81ffff or 0x8005010d2b81ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0512

User Response

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

319

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 333 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: