Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 350

Page: 350 / 1022

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0522

User Response

1. Check for a server firmware update.

2. Make sure that the installed microprocessors are compatible.

3. Make sure the microprocessor 2 expansion board is installed correctly (see Installing the

microprocessor 2 expansion board).

4. (Trained technician only) Replace microprocessor

5. (Trained technician only) Replace microprocessor 2 expansion board.

•

8007021b-0302ffff : Sensor [SensorElementName] has transitioned to critical from a less severe

state. (CPU 2 QPILinkErr)

This message is for the use case when an implementation has detected a Sensor transitioned to critical
from less severe.

May also be shown as 8007021b0302ffff or 0x8007021b0302ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0522

User Response

1. Check for a server firmware update.

2. Make sure that the installed microprocessors are compatible.

336

Lenovo NeXtScale nx360 M5 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 350 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: