Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 279

Page: 279 / 1022

A user has modified the Remote Presence port number

May also be shown as 4000004600000000 or 0x4000004600000000

Severity

Info

Serviceable

Automatically notify support

Alert Category

none

SNMP Trap ID

CIM Information

Prefix:

IMM

ID:

0070

User Response

Information only; no action is required.

•

40000047-00000000 : LED [arg1] state changed to [arg2] by [arg3]. ()

A user has modified the state of an LED

May also be shown as 4000004700000000 or 0x4000004700000000

Severity

Info

Serviceable

Automatically notify support

Alert Category

none

SNMP Trap ID

CIM Information

Prefix:

IMM

ID:

0071

User Response

Information only; no action is required.

•

40000048-00000000 : Inventory data changed for device [arg1], new device data hash=[arg2], new

master data hash=[arg3] . ()

Something has caused the physical inventory to change

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

265

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 279 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: