Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 392

Page: 392 / 1022

This message is for the use case when an implementation has detected a Watchdog Timer Expired.

May also be shown as 806f00232101ffff or 0x806f00232101ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0368

User Response

No action; information only.

•

806f0028-2101ffff : Sensor [SensorElementName] is unavailable or degraded on management

system [ComputerSystemElementName]. (TPM Cmd Failures)

This message is for the use case when an implementation has detected a Sensor is Unavailable or
degraded.

May also be shown as 806f00282101ffff or 0x806f00282101ffff

Severity

Warning

Serviceable

Yes

Automatically notify support

Alert Category

Warning - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0398

User Response

1. Turn off the server and disconnect the power cords. Reconnect the power cords and restart

the server.

2. If the problem remains, (trained technician only) replace the system board.

378

Lenovo NeXtScale nx360 M5 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 392 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: