Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 801

Page: 801 / 1022

•

816f090c-2004ffff : [PhysicalMemoryElementName] on Subsystem [MemoryElementName] is no

longer Throttled. (DIMM 4)

This message is for the use case when an implementation has detected Memory is no longer Throttled.

May also be shown as 816f090c2004ffff or 0x816f090c2004ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0143

User Response

No action; information only.

•

816f090c-2005ffff : [PhysicalMemoryElementName] on Subsystem [MemoryElementName] is no

longer Throttled. (DIMM 5)

This message is for the use case when an implementation has detected Memory is no longer Throttled.

May also be shown as 816f090c2005ffff or 0x816f090c2005ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0143

User Response

No action; information only.

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

787

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 801 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: