Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 825 / 1022

3. If the error continues, replace the system-board assembly (see Removing the system-board
assembly and Installing the system-board assembly).
• I.3868000 [I.3868000]
Explanation: IFM: System reset performed to reset adapters. IFM: System reset performed to reset
adapters
Severity
Info
User Response
Complete the following steps:
1. Information only; no action is required.
• I.3868003 [I.3868003]
Explanation: IFM: Configuration to large for compatibility mode. IFM: Configuration too large for
compatibility mode
Severity
Info
User Response
Complete the following steps:
1. Information only; no action is required.
• I.5100B [I.5100B]
Explanation: An unqualified DIMM serial number has been detected: serial number % found in slot % of
memory card %. Unqualified DIMM Serial Number Detected
Severity
Info
User Response
Complete the following steps:
1. If this information event is logged in the IMM event log, the server does not have qualified
memory installed.
2. The memory installed may not be covered under warranty.
3. Without qualified memory, speeds supported above industry standards will not be enabled.
4. Please contact your Local Sales Representative or Authorized Business Partner to order
qualified memory to replace the unqualified DIMM(s).
5. After you intall qualified memory and power up the server, check to make sure this informational
event is not logged again.
• I.58015 [I.58015]
Explanation: Memory spare copy initiated. Spare Copy Started
Appendix B. UEFI (POST) error codes
811