Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 477

Page: 477 / 1022

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0360

User Response

No action; information only.

•

806f0323-2101ffff : Power cycle of system [ComputerSystemElementName] initiated by watchdog

[WatchdogElementName]. (IPMI Watchdog)

This message is for the use case when an implementation has detected a Power Cycle by Watchdog
occurred.

May also be shown as 806f03232101ffff or 0x806f03232101ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0374

User Response

No action; information only.

•

806f040c-2001ffff : [PhysicalMemoryElementName] Disabled on Subsystem

[MemoryElementName]. (DIMM 1)

This message is for the use case when an implementation has detected that Memory has been Disabled.

May also be shown as 806f040c2001ffff or 0x806f040c2001ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

463

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 477 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: