Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 346

Page: 346 / 1022

User Response

1. Run the hard disk drive diagnostic test on drive n.

2. Reseat the following components: a. Hard disk drive (wait 1 minute or more before reinstalling

the drive) b. Cable from the system board to the backplane

3. Replace the following components one at a time, in the order shown, restarting the server

each time: a. Hard disk drive b. Cable from the system board to the backplane c. Hard disk
drive backplane (n = hard disk drive number)

•

8007020d-0b07ffff : Sensor [SensorElementName] has transitioned to critical from a less severe

state. (RAID #7 Volume)

This message is for the use case when an implementation has detected a Sensor transitioned to critical
from less severe.

May also be shown as 8007020d0b07ffff or 0x8007020d0b07ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0522

User Response

1. Run the hard disk drive diagnostic test on drive n.

2. Reseat the following components: a. Hard disk drive (wait 1 minute or more before reinstalling

the drive) b. Cable from the system board to the backplane

3. Replace the following components one at a time, in the order shown, restarting the server

each time: a. Hard disk drive b. Cable from the system board to the backplane c. Hard disk
drive backplane (n = hard disk drive number)

•

8007020d-2b81ffff : Sensor [SensorElementName] has transitioned to critical from a less severe

state. (FDIMM Warranty)

This message is for the use case when an implementation has detected a Sensor transitioned to critical
from less severe.

May also be shown as 8007020d2b81ffff or 0x8007020d2b81ffff

332

Lenovo NeXtScale nx360 M5 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 346 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: