Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 821

Page: 821 / 1022

3. Check the IBM support site for an applicable service bulletin or firmware update that applies to

this processor error.

4. (Trained Service technician only) Replace the Processor. Inspect Processor socket and replace

the system board first if socket is damaged

•

I.1800C [I.1800C]

Explanation:

A cache type mismatch has been detected for one or more processor packages.

Processors have one or more cache levels with mismatched type

Severity

Error

User Response

Complete the following steps:

1. Verify that matching processors are installed in the correct processor sockets. Correct any

mismatch found.

2. Check the IBM support site for an applicable service bulletin or firmware update that applies to

this processor error.

3. (Trained technician only)Replace the system board

•

I.1800D [I.1800D]

Explanation:

A cache associativity mismatch has been detected for one or more processor packages.

Processors have one or more cache levels with mismatched associativity

Severity

Error

User Response

Complete the following steps:

1. Verify that matching processors are installed in the correct processor sockets. Correct any

mismatch found.

2. Check the IBM support site for an applicable service bulletin or firmware update that applies to

this processor error.

3. (Trained technician only)Replace the system board

•

I.1800E [I.1800E]

Explanation:

A processor model mismatch has been detected for one or more processor packages.

Processors have mismatched Model Number

Severity

Error

User Response

Complete the following steps:

1. Verify that matching processors are installed in the correct processor sockets. Correct any

mismatch found.

Appendix B. UEFI (POST) error codes

807

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M5

Reviews:

Lenovo NeXtScale nx360 M5, Installation And Service Manual, Page: 821 / 1022

Search results

Summary of Contents for NeXtScale nx360 M5

Reviews: