Goodrive600 series high-performance multifunction VFD
Installation
-26-
1. Remove the upper cover.
(1) Rotate the middle cover
up, and remove it.
(2) Rotate the translucent keyboard
cover up, and loosen the screws
fixed on the cover with a straight
screwdriver.
(3) Pull the upper cover straight out.
2. Connect the bus bars.
(1) Loosen the DC bus bar screws (without removing them).
(2) Connect the parallel copper bars and fasten the screws.
3. Install the upper cover.
(1) Insert the upper cover into
the bus block.
(2) Fasten the screws fixed on the
upper cover with a straight
screwdriver, and close the
translucent keyboard cover.
(3) Insert the two snap-fits of the middle
cover into the upper cover, and rotate
and buckle it onto the chassis.