Goodrive600 series high-performance multifunction VFD
Optional peripheral accessories
-410-
E.9.3 USB-RS485 communication module
The USB-RS485 communication module (model: EC-TM485-USB) is used to connect the Workshop on the upper
computer to the A interface (RJ45) of the VFD. This module has been configured with the RS485 and type-B interfaces
and with adapter cables (for type B-USB and RJ45-RS485).
E.9.4 Bus terminals
The 100A bus terminal is applicable to the 1.5
–7.5kW inverter units (50mm wide), with one terminal for one unit.
The 200A bus terminal is applicable to the 11
–75kW inverter units and the 45kW and 160kW rectifier units. Only one
terminal can be installed for the 45kW rectifier unit and 11
–37kW inverter units. Two terminals can be installed for the
45
–75kW inverter units. Three terminals can be installed for the 160kW rectifier unit.
No.
Terminal
Terminal
specifications
Cable specifications
1
100A bus terminal
GD600-CON2
16AWG-2AWG
2
200A bus terminal
GD600-CON1
6AWG-150mm²
The bus terminal drawing is as follows.
100 A bus terminal
200 A bus terminal
E.9.5 Shield bracket
You are recommended to use the cable with a shield layer as the inverter unit output cable. You can use a shield bracket
to fix the shield layer (selecting different shield brackets according to width dimensions).
The shield bracket structure is as follows.
