Goodrive600 series high-performance multifunction VFD
Basic operation guidelines
-45-
No.
Name
Description
3
LED tube
Five-digit LED displays various monitoring data and alarm codes such as the
frequency setting and output frequency.
Display Means Display Means Display Means Display Means
0
0
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
A
A
B
B
C
C
D
D
E
E
F
F
H
H
I
I
L
L
N
N
n
n
o
o
P
P
r
r
S
S
t
t
U
U
v
v
.
.
-
-
4
Keys
Programming key
Press it to enter or exit level-1 menus or delete
a parameter.
Confirmation key
Press it to enter menus in cascading mode or
confirm the setting of a parameter. In addition,
you can press it in the fault interface to
implement fault reset.
UP
Press it to increase data or move upward.
DOWN
Press it to decrease data or move downward.
Right-shifting key
Press it to select display parameters rightward
in the interface for the VFD in stopped or
running state or to select digits to change
during parameter setting.
5.3 Keypad display
The VFD keypad displays information such as the stopped-state parameters, running-state parameters, and fault status,
and allows you to modify function codes.
5.3.1 Displaying stopped-state parameters
When the VFD is in stopped state, the keypad displays stopped-state parameters, as shown in Figure 5-2. In the stopped
state, the rectifier unit can display the following parameters: grid frequency, grid voltage, bus voltage, and input current.
You can press the SHIFT key to shift selected parameters from left to right. The parameters that the inverter unit can
display in the stopped state are specified by P07.07.
Figure 5-2 Displaying stopped-state parameters
5.3.2 Displaying running-state parameters
After receiving a valid running command, the rectifier/inverter enters the running state, and the keypad displays
running-state parameters, with the RUN/TUNE indicator on. See Figure 5-2.