User’s Guide
CRS2F31xx-100
Slide-in-Module Media Converter
RS-232 to Fiber
Transition Networks CRS2F31xx-100 series media
converters are designed to be installed in the
PointSystem™
chassis and connect copper RS-232
cable to fiber-optic cable at asynchronous data rates up
to 115 kB/s.
The CRS2F31xx-100 is designed to be installed in pairs
where one is the local media converter and the other is
the remote.
Installation . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . .6
Cable Specifications . . . . . . . . . . .7
Technical Specifications . . . . . . . .8
Troubleshooting . . . . . . . . . . . . . .9
Contact Us . . . . . . . . . . . . . . . . .11
Compliance Information . . . . . . .12
Part Number
Port One - Copper
Port Two - Duplex Fiber-Optic
CRS2F3111-100
RS-232
15 m
(50 ft)
ST, 1300 nm multimode
2 km
(1.2 miles)
*
CRS2F3113-100
RS-232
15 m
(50 ft)
SC, 1300 nm multimode
2 km
(1.2 miles)*
CRS2F3114-100
RS-232
15 m
(50 ft)
SC, 1310 nm single mode
20 km
(12.4 miles)
*
CRS2F3115-100
RS-232
15 m
(50 ft)
SC, 1310 nm single mode
40 km
(24.8 miles)
*
CRS2F3129-100
RS-232
15 m
(50 ft)
SC, 1310 TX/1550 RX nm single mode
20 km
(12.4 miles)
**
CRS2F3129-101
RS-232
15 m
(50 ft)
SC, 1550 TX/1310RX nm single mode
20 km
(12.4 miles)**
CRS2F3129-102
RS-232
15 m
(50 ft)
SC, 1550 TX/1310RX nm single mode
40 km
(12.4 miles)**
CRS2F3129-103
RS-232
15 m
(50 ft)
SC, 1550 TX/1310RX nm single mode
40 km
(24.8miles)**
* Typical maximum cable distance.
Actual distance is dependent upon the
physical characteristics of the network
installation.
**Install CRS2F3129-100/101 or CRS2F3129-102/103 in the same network
where one is the local converter and the other is the remotec onverter.
