GE T60, Instruction Manual

Page: 780 / 796

H-4 T60 Transformer Protection System GE Multilin
H.1 CHANGE NOTES APPENDIX H
H
1-1 1-1 Add Added General Cautions and Warnings to section 1.1.1
1-5 1-5 Update Revised section 1.3.1 on system requirements, including addition of support for Windows 7 and
Windows Server 2008
2-12 2-12 Update Updated several specifications
5-25 5-25 Add Added section 5.2.5e Routing
5-103 5-103 Update Updated Figures 5-28 and 5-29 Dual Breaker Control Scheme Logic, sheets 1 and 2
5-107 5-107 Update Updated Figure 5-30 Disconnect Switch Scheme Logic
5-282 5-282 Add Reinserted section 5.8.5c Remote Devices: ID of Device for Receiving GSSE/GOOSE Messages,
meaning the Settings > Input/Outputs > Remote Devices settings
Table H–7: MAJOR UPDATES FOR T60 MANUAL REVISION Y3
PAGE
(Y2)
PAGE
(Y3)
CHANGE DESCRIPTION
-- xi Add Added battery disposal information as chapter 0
5-90 5-90 Add Added a reference to the T35/T60 Reference Winding Selection and CT Ratio Mismatch
Application Note in section 5.4.4b General Transformer Settings, specifically the Reference
Winding setting
Table H–8: MAJOR UPDATES FOR T60 MANUAL REVISION Y2
PAGE
(Y1)
PAGE
(Y2)
CHANGE DESCRIPTION
All All Update Minor changes throughout document
All All Delete Deleted CPU options U and V
1-1 1-1 Update Updated Figure 1-1 Rear Nameplate
3-8 3-8 Update Updated Figure 3-10 Rear Terminal View
Table H–9: MAJOR UPDATES FOR T60 MANUAL REVISION Y1 (Sheet 1 of 3)
PAGE
(X2)
PAGE
(Y1)
CHANGE DESCRIPTION
All All Delete Deleted content pertaining to Ethernet switch
Title Title Update Changed part numbers. Updated address and contact information.
1-1 1-1 Update Updated address and contact information
2- 2- Add Added CPU options T, U, and V to order code table
2- 2- Delete Removed E, G, H, J, S from CPU options from order code tables
2-10 2-10 Delete Deleted 9S, 2S, 2T from replacement module order code Tables 2-7 and 2-8
2-12 2-12 Update Changed number of phase distance and ground distance zones to 5 in Protection Elements
section 2.2.1
2-21 2-21 Update Updated Ethernet fiber table in section 2.2.8 Communications
3-10 3-10 Update Updated Figure 3-12 Typical Wiring Diagram
3-23 3-23 Update Deleted references to COM 1 RS485 port in section 3.2.9 CPU Communication Ports. Revised
text and Figure 3-24 CPU Module Communications Wiring to include only modules T, U, V in
section 3.2.9a.
5-1 5-1 Update Updated the front panel main menu to include the CyberSentry security menu
5-15 5-15 Update Update Communications main menu to remove the SNTP Protocol submenu
5-16 5-16 Delete Deleted references to COM 1 RS485 port in section 5.2.4b Serial Ports
5-17 5-17 Add Added section 5.2.4c Ethernet Network Topology
Table H–6: MAJOR UPDATES FOR T60 MANUAL REVISION Z1 (Sheet 2 of 2)
PAGE
(Y3)
PAGE
(Z1)
CHANGE DESCRIPTION