manualshive.com logo in svg

GE T60, Instruction Manual

The GE T60 Instruction Manual is available for free download from manualshive.com. This comprehensive manual provides detailed information on how to use and maintain the GE T60 product efficiently. Get the most out of your T60 with this user-friendly manual, offering step-by-step instructions and useful tips.

Share
Download
background image

GE Multilin

T60 Transformer Protection System

C-9

APPENDIX C 

C.4 GENERIC SUBSTATION EVENT SERVICES: GSSE AND GOOSE

C

Items programmed for dataset 1 and 2 will have changes in their status transmitted as soon as the change is detected.
Dataset 1 should be used for high-speed transmission of data that is required for applications such as transfer tripping,
blocking, and breaker fail initiate. At least one digital status value needs to be configured in dataset 1 to enable transmis-
sion of all data configured for dataset 1. Configuring analog data only to dataset 1 will not activate transmission.

Items programmed for datasets 3 through 8 will have changes in their status transmitted at a maximum rate of every
100 ms. Datasets 3 through 8 will regularly analyze each data item configured within them every 100 ms to identify if any
changes have been made. If any changes in the data items are detected, these changes will be transmitted through a
GOOSE message. If there are no changes detected during this 100 ms period, no GOOSE message will be sent.

For all datasets 1 through 8, the integrity GOOSE message will still continue to be sent at the pre-configured rate even if no
changes in the data items are detected.

The GOOSE functionality was enhanced to prevent the relay from flooding a communications network with GOOSE mes-
sages due to an oscillation being created that is triggering a message.

The T60 has the ability of detecting if a data item in one of the GOOSE datasets is erroneously oscillating. This can be
caused by events such as errors in logic programming, inputs improperly being asserted and de-asserted, or failed station
components. If erroneously oscillation is detected, the T60 will stop sending GOOSE messages from the dataset for a min-
imum period of one second. Should the oscillation persist after the one second time-out period, the T60 will continue to
block transmission of the dataset. The T60 will assert the 

MAINTENANCE ALERT: GGIO Ind XXX oscill

 self-test error mes-

sage on the front panel display, where 

XXX

 denotes the data item detected as oscillating.

The configurable GOOSE feature is recommended for applications that require GOOSE data transfer between UR-series
IEDs and devices from other manufacturers. Fixed GOOSE is recommended for applications that require GOOSE data
transfer between UR-series IEDs.

IEC 61850 GOOSE messaging contains a number of configurable parameters, all of which must be correct to achieve the
successful transfer of data. It is critical that the configured datasets at the transmission and reception devices are an exact
match in terms of data structure, and that the GOOSE addresses and name strings match exactly. Manual configuration is
possible, but third-party substation configuration software may be used to automate the process. The EnerVista UR Set-
upsoftware can produce IEC 61850 ICD files and import IEC 61850 SCD files produced by a substation configurator (see
the IEC 61850 IED configuration information later in this appendix).

Use independent ports for IEC 61850 communication and take care when configuring the settings,
else loss of protection or misoperation of the relay can result.

The following example illustrates the configuration required to transfer IEC 61850 data items between two devices. The
general steps required for transmission configuration are:

1.

Configure the transmission dataset.

2.

Configure the GOOSE service settings.

3.

Configure the data.

The general steps required for reception configuration are:

1.

Configure the reception dataset.

2.

Configure the GOOSE service settings.

3.

Configure the data.

This example shows how to configure the transmission and reception of three IEC 61850 data items: a single point status
value, its associated quality flags, and a floating point analog value.

The following procedure illustrates the transmission configuration.

1.

Configure the transmission dataset by making the following changes in the 

PRODUCT SETUP 



 COMMUNICATION 



IEC 61850 PROTOCOL 

 GSSE/GOOSE CONFIGURATION 

 TRANSMISSION 



 CONFIGURABLE GOOSE 

 CONFIGURABLE

GOOSE 1 



 CONFIG GSE 1 DATASET ITEMS

 settings menu:

–

Set 

ITEM 1

 to “GGIO1.ST.Ind1.q” to indicate quality flags for GGIO1 status indication 1.

–

Set 

ITEM 2

 to “GGIO1.ST.Ind1.stVal” to indicate the status value for GGIO1 status indication 1.

The transmission dataset now contains a set of quality flags and a single point status Boolean value. The reception
dataset on the receiving device must exactly match this structure.

NOTICE

Summary of Contents for T60





























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for T60

Farris Engineering 2600 Series General Installation And Maintenance Instructions preview
2600 Series
Brand: Farris Engineering Pages: 12
Eastern Times Technology BT-100 Quick Start Manual preview
BT-100
Brand: Eastern Times Technology Pages: 4
Vacon 10 Quick Manual preview
10
Brand: Vacon Pages: 18
CAME G5000 Installation, Operation And Maintenance Manual preview
G5000
Brand: CAME Pages: 32
Babybee Prams Comet Instruction Manual preview
Comet
Brand: Babybee Prams Pages: 21
CAME ZL90 Installation Manual preview
ZL90
Brand: CAME Pages: 18
CAME ZN2 User Manual preview
ZN2
Brand: CAME Pages: 28
CAME ZG6 Original-Spare Parts preview
ZG6
Brand: CAME Pages: 28
CAME S0001 Quick Start Manual preview
S0001
Brand: CAME Pages: 4
CAME ZL90 Manual preview
ZL90
Brand: CAME Pages: 40
CAME CAT Series Quick Start Manual preview
CAT Series
Brand: CAME Pages: 26
CAME CAT Series Manual preview
CAT Series
Brand: CAME Pages: 34
CAME TOP Series Quick Start Manual preview
TOP Series
Brand: CAME Pages: 2
Faulhaber MC 5004 Technical Manual preview
MC 5004
Brand: Faulhaber Pages: 66
National Instruments 9853 Getting Started Manual preview
9853
Brand: National Instruments Pages: 29
OBaby mercury Instruction Manual preview
mercury
Brand: OBaby Pages: 7
National Instruments PXI-6683 Series Installation Manual preview
PXI-6683 Series
Brand: National Instruments Pages: 4
National Instruments NI R Series User Manual preview
NI R Series
Brand: National Instruments Pages: 9

Brands by name

Popular brands

Load more brands