manualshive.com logo in svg

GE T60, Instruction Manual

The GE T60 Instruction Manual is available for free download from manualshive.com. This comprehensive manual provides detailed information on how to use and maintain the GE T60 product efficiently. Get the most out of your T60 with this user-friendly manual, offering step-by-step instructions and useful tips.

Share
Download
background image

2-8

T60 Transformer Protection System

GE Multilin

2.1 INTRODUCTION

2 PRODUCT DESCRIPTION

2

3.

Supervisor = RW (default), Administrator = R (default), Administrator = RW (only if Supervisor role is disabled)

4.

NA = the permission is not enforced by CyberSentry Security

CYBERSENTRY USER AUTHENTICATION

There are two types of authentication supported by CyberSentry that can be used to access the UR device:

•

Device Authentication (local UR device authenticates)

•

Server Authentication (RADIUS server authenticates)

The EnerVista software allows access to functionality that is determined by the user role, which comes either from the local
UR device or RADIUS server.

The EnerVista software has a device authentication option on the login screen for accessing the UR device. When the
"Device"  button is selected, the UR uses its local authentication database and not the RADIUS server to authenticate the
user. In this case, it uses its built-in roles (Administrator, Engineer, Supervisor, Observer, Operator, or Administrator and
Supervisor when Device Authentication is disabled) as login names and the associated passwords are stored on the UR
device. As such, when using the local accounts, access is not user-attributable.

In cases where user attributable access is required especially to facilitate auditable processes for compliance reasons, use
RADIUS authentication only.

When the "Server" Authentication Type option is selected, the UR uses the RADIUS server and not its local authentication
database to authenticate the user.

No password or security information are displayed in plain text by the EnerVista software or UR device, nor are they ever
transmitted without cryptographic protection.

CyberSentry Server Authentication

The UR has been designed to automatically direct authentication requests based on user names. In this respect, local
account names on the UR are considered as reserved, and not used on a RADIUS server.

The UR automatically detects whether an authentication request is to be handled remotely or locally. As there are only five
local accounts possible on the UR, if the user ID credential does not match one of the five local accounts, the UR automat-
ically forwards the request to a RADIUS server when one is provided.

If a RADIUS server is provided, but is unreachable over the network, server authentication requests are denied. In this situ-
ation, use local UR accounts to gain access to the UR system.

2.1.3 IEC 870-5-103 PROTOCOL

IEC 870-5-103 is a companion standard to IEC 870-5 suit of standards for transmission protocols. It defines messages and
procedures for interoperability between protection equipment and devices of a control system in a substation for communi-
cating on a serial line.

The IEC 60870-5-103 is an unbalanced (master-slave) protocol for coded-bit serial communication, exchanging information
with a control system. In the context of this protocol, the protection equipment is the slave and the control system is the
master. The communication is based on a point to point principle. The master must be able to interpret the IEC 60870-5-
103 communication messages.

The UR implementation of IEC 60870-5-103 consists of the following functions:

•

Report binary inputs 

•

Report analog values (measurands)

•

Commands

•

Time synchronization

The RS485 port supports IEC 60870-5-103.

Summary of Contents for T60





























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for T60

Harpo BraillePen 12 Quick Start Manual preview
BraillePen 12
Brand: Harpo Pages: 35
Hardi HC 6500 Quick Manual preview
HC 6500
Brand: Hardi Pages: 2
IDS X64 Manual preview
X64
Brand: IDS Pages: 2
Jabra 14201-20 - How To Connect preview
14201-20 -
Brand: Jabra Pages: 3
jablotron RC-40 Manual preview
RC-40
Brand: jablotron Pages: 2
Omega PHCN-37 User Manual preview
PHCN-37
Brand: Omega Pages: 56
Omega DP25-TC Quick Start Manuals preview
DP25-TC
Brand: Omega Pages: 2
Samwontech TEMP2000 Series Installation Manual preview
TEMP2000 Series
Brand: Samwontech Pages: 91
Warren rupp HDF3-A Original Instructions Manual preview
HDF3-A
Brand: Warren rupp Pages: 18
Yamaha QL5 Manual preview
QL5
Brand: Yamaha Pages: 100
WAGNER PV 100 Translation Of The Original Operating Manual preview
PV 100
Brand: WAGNER Pages: 60
DigiPower IPP-S Series Installation Manual preview
IPP-S Series
Brand: DigiPower Pages: 27
Kolcraft Travel About Series Instruction Sheet preview
Travel About Series
Brand: Kolcraft Pages: 14
Miller-Leaman THOMPSON PDA Owner'S Manual preview
THOMPSON PDA
Brand: Miller-Leaman Pages: 18
MaintTech CX300 User Manual preview
CX300
Brand: MaintTech Pages: 28
East Coast Datacom DMM-X21 Operation Manual preview
DMM-X21
Brand: East Coast Datacom Pages: 14
HQ Power VDPLC010 User Manual preview
VDPLC010
Brand: HQ Power Pages: 23
Carrier AQUASNAP 30RA "B" Operation & Maintenance Instructions Manual preview
AQUASNAP 30RA "B"
Brand: Carrier Pages: 36

Brands by name

Popular brands

Load more brands