Foma F903i' 06.10, User Manual

Page: 77 / 567

75
Voice call/Videophone call
Applying special effects to image <Scene mode/effect>
You can apply the following effects on an outgoing image. Effects can be applied only while camera image
is being sent.
1
During a call,
m e 2 e 1
-
6
Standard : Sends standard image.
Sunset : Used when shooting subjects against sunset glow.
Backlight : Used when shooting subjects against the light.
Sea/Snow : Shooting beautiful light reflection in sceneries such as the sea and snowy surface.
Monotone : Used for Monotone.
Sepia : Used for Sepia tone.
Adjusting brightness/color density/flicker of images <Camera settings>
You can adjust the brightness and color density of images. If you are worried about flicker of the image,
the flicker may be reduced by selecting the settings that match the power supply frequency of your area.
I
You can adjust the brightness and color density at 5 levels.
I
Adjustment can be made only while sending camera image.
I
The settings are retained even after a call.
<Example> Adjusting brightness/color density
1
During a call,
m e 31
■ Adjusting flicker :
m e 32 e 1
-
3
･
The setting of Flicker adjustment is reflected to Adjust flicker setting of
Camera or Bar code reader.
2
j
to move the cursor on the slider of Brightness/Density
e h
to adjust the
brightness/color density
e p
[Set]
･
If you do nothing on the terminal for some time after adjusting, the setting is not changed and the
talking screen reappears.
Switching between in-camera/out-camera
I
You can switch between in-camera and out-camera only when sending a camera image.
1
During a call,
a
[CameraSW].
The image is displayed through the switched camera.
･
Each time you press the key, the
camera switches between the in-
camera and the out-camera.
Default Brightness: Level 3 Density: Level 3 Flicker adjustment: Auto
Default In-camera
In-camera being
selected Out-camera being
selected
Continue
e