Foma F903i' 06.10, User Manual

Page: 231 / 567

229
Mail
3
Select " 受信 (Receive) ／削除 (Delete)"
e
Select " 決定 (Select)"
i-mode message
MENU 161/25
Checking for mail
You can make inquiry for any i-mode mail
delivered while you were out of service area or the
power was turned off.
MessageR/F can also be checked at the same time
if it is set in Message retrieval setting.
I
Depending on the signal quality, you may not be
able to perform i-mode inquiry.
I
When you cannot receive message → P215
1
Side key [
▼
] (1 sec. or more)
i-mode inquiry is started. If the i-mode Center
stores i-mode mail, it is received.
･
During Message retrieval, the light is lit in a
rainbow color. When there are no newly
received i-mode mail after Message
retrieval, the light flashes in red. When
Message retrieval failed, the light flashes in
yellow.
･
Operation on the reception result screen is
the same as for Mail auto receive. However,
unlike auto receive, the screen does not
return to the original screen even after about
15 seconds. Press
c
to return to the
stand-by display without displaying i-mode
mail.
→
P227
INFORMATION
･
i-mode inquiry also available by pressing and holding
one of side keys [ ▼ ] for 1 second or more with FOMA
terminal folded.
Replying to i-mode mail
Replying to i-mode mail
You can reply the received i-mode mail or SMS.
i-mode mail can also be replied by simply selecting
a message registered by default (Quick reply).
I
You may not be able to reply to some received
messages.
I
You cannot reply to received SMS for which
"Anonymous", "Payphone" or "Unavailable" is
displayed in the sender field.
1 a e 1 e
Select a folder
2
Place the cursor on the message to reply
and
p
.
The Reply Templates screen is displayed.
･
The Reply Templates screen is not displayed
in the cases below. Go to Step 4.
- When Activate quick reply is set to "OFF"
- When no quick reply template is registered
- When replying to SMS
■
Replying to sender of received message
sent to multiple addresses and all other
receivers :
Place the cursor on the message
to reply and
m e 1 e 3
or
4
･
You can reply to all addresses other than
yourself and the sender.
3
Press
1
.
The sender's mail address or phone number of
the received message is entered in the
receiver entry field, the subject of the received
message is entered in the subject entry field
with "RE:" affixed at the beginning (only
i-mode mail), and text of received message
with ">" is entered in the text entry field.
･
You can set whether to quote the message
when replying; quote characters added at
the beginning of the quoted message.
→
P250
■
Using Quick reply :
2
-
6
･
The selected quick reply template is
inserted before the quoted text.
4
Edit the message
e p
[Send]
･
When the received message list is displayed
after the message is replied, the status icon
for the received message changes from
to , or to .
INFORMATION
･
When
m
→ "Reply/Forward" is selected from the
received message list screen and detail view screen,
"Reply" (received message text not quoted) or "Reply
with quote" (received message text quoted) can be
selected regardless of the settings of Reply format.
･
The received message attachments are not attached
for replies.
Continue
e