Foma F903i' 06.10, User Manual

Page: 39 / 567

37
Before using F903i
Attaching/removing battery pack
I
After turning the power OFF, fold FOMA terminal and hold it with your hand.
I
Removing the battery pack may cause reservation of Software update to be canceled. In addition, when
the date and time is set with Auto time adjust set to "OFF" in Date & time, removing the battery pack may
delete the date and time.
Attaching/removing battery pack
■
Attaching
WORLD WING
WORLD WING is the DoCoMo FOMA international roaming service. By taking out the UIM (Except blue)
from the FOMA terminal you normally use and inserting it into a FOMA terminal supporting the service,
you can make/receive a call in foreign countries with your own mobile phone number. Note that F903i
is only available in DoCoMo's 3G roaming service areas. When using in GSM service areas, you have
to replace the UIM (Except blue) with a GSM-compatible terminal.
You do not need to apply to use WORLD WING.
Note-1: If you subscribed to FOMA service on or after September 1, 2005, separate subscription is not required to use
WORLD WING. Note that, if you declined to use WORLD WING at subscription to FOMA service, you need
subscription.
Note-2: If you subscribed to FOMA service on or before August 31, 2005 but not to WORLD WING, separate
subscription is required to use WORLD WING only for the first time.
Note-3: There are some charging plans unavailable.
Note-4: If UIM (Except blue) is misplaced or stolen overseas, immediately contact DoCoMo and request for suspension of
usage. Please refer to the phone number for inquiries on the back of this manual for contact information. Please be
careful that you will be charged also for calls and/or communications, if any, occurring after misplacement or stealage.
a
Remove the rear cover by sliding it about
3 mm in the direction of the arrow while
pressing it with your thumb.
b
With the label side of the battery pack face up,
align the convex part of the battery pack with the
concave part of FOMA terminal, insert the battery
pack in the direction of
a
and press it in the
direction of
b
until it fits.
Press here with your
thumb.
Rear cover
Battery pack
Convex part
Concave
part
c
Bring the 4 tabs of the rear cover to meet the
cuts in FOMA terminal. Slide in the direction
of
b
to fit in while pressing in the direction
of
a
so that no gap is generated between
FOMA terminal and the rear cover.
■ Removing
a
Perform Step
a
in Attaching battery pack.
b
Hold and raise the battery pack tab in the
direction shown by the arrow to remove the
battery back.
Rear cover
Tab
Continue
e