Foma F903i' 06.10, User Manual

Page: 524 / 567

23
3
Select " 『 mopera U 』への接続 (mopera U connection)" or " 『 mopera 』への
接続 (mopera connection)" and click [ 次へ (Next)].
･
After selecting " 『 mopera U 』への接続 (mopera U connection)" and clicking [ 次へ (Next)], a
subscription confirmation message appears. If you have already subscribed, click [ はい (Yes)].
4
Enter the desired dialup connection name in " 接続名 (Connection name)" →
Select " 発信者番号通知を行う (Send caller ID)" and click [ 次へ (Next)].
･
You cannot use "." (one-byte) at the beginning of "
接続名
(Connection name)". Also, the following
characters (one-byte) cannot be used:
￥ /: ＊ ?!<> ｜
･
Check that "FOMA F903i" is set for "
モデムの選択
(Modem selection)".
･
This FOMA terminal does not support 64K data communications overseas.
5
Set " 使用可能ユーザーの選択 (Selection of the users that are allowed to
access the connection)" and click " 次へ (Next)".
･
You do not need to enter " ユーザー名 (User name)" or " パスワード (Password)".