Foma F903i' 06.10, User Manual

Page: 184 / 567

182
Camera
CODE39 code
CODE39 code is a bar code representing
alphanumeric characters and symbols with vertical
lines (bars) of different widths. Bar code with a
maximum of 20 characters, a 2-character start
symbol and a 2-character end symbol can be read.
CODE39 code shown above represents numeral
data "
＊ 123456ABC ＊ ".
Scanning code
1 m e 61
After Bar code reader is started, camera
automatically switches to Macro shooting.
Zoom automatically sets ON and
appears
indicating that the bar code is being read.
Place the out-camera approximately 6-11 cm
away from the code to scan.
･
During Bar code reader stand-by, the
following operations are enabled:
u
： Zoom ON
d
： Zoom OFF
#
：
Switches between Macro OFF (no
icon) and Macro ON (
).
･
Switch to Macro OFF before scanning large
size codes. In addition, the readability of
code may be raised by setting zoom OFF.
■ Switching to normal still image shooting or
movie recording :
m e 3 e 1
or
2
･
When Bar code reader has not been
started from Camera or the stand-by
display, the switching is unavailable.
■ Adjusting flicker :
m e 2 e 1
-
3
Select the power supply frequency of your
area. When you select "Auto", the power
supply frequency is adjusted automatically.
･
This setting is kept even when Camera is
ended.
2
Scan the code.
When the out-camera is placed toward the
code, the code is scanned automatically. A
confirmation sound is played when scanning a
code is completed and the scanned data is
displayed.
･
If scanned data exceeds 11,000 one-byte
characters or 5,500 two-byte characters,
exceeded characters are not displayed, but
can be saved.
■ Rescanning code : Press
p
.
･
You can also press
m2
to scan the
code again.
3 m e 4
･
When 5 data items have already been saved
or the memory for data is not enough, a
confirmation screen is displayed asking
whether to delete saved data. Select "Yes" to
delete the saved data.
■ Copying text information in scanned data :
a
m e 1 e
Select the start position
･
Press
m
to select all text information at
once.
b
Select the end point.
The text information in the selected
range is copied.
INFORMATION
･
The setting of Adjust flicker is reflected to Flicker
adjustment/Adjust flicker setting of Videophone and
Camera.
･
If the code is hard to read, it may be read by adjusting
the distance between the code and out-camera or the
angle or direction of the out-camera, etc.
･
With Call alert volume and Mail/Msg alert vol. in
Adjust volume are set to "Silent" or in Silent or Public
mode, no confirmation sound is heard when reading
code.
Approx.
6-11cm
The scanned data is
saved.