Foma F903i' 06.10, User Manual

Page: 506 / 567

5
Connecting PC to FOMA terminal
I
The connection should be made with the PC and FOMA terminal both turned ON.
I
Install the communication configuration file (driver) before connecting with a PC for the first time. → P6
Connecting using USB cable
1
Insert the connector of the USB cable into the FOMA terminal's external
connection terminal.
2
Insert the other end of the USB cable into the PC USB port.
･
If you connect FOMA terminal to PC before installing a communication configuration file,
Windows may automatically detect that a USB cable has been inserted and request the driver, and
the wizard screen will be displayed. In that case, remove the FOMA terminal and click [
キャンセル
(Cancel)] to exit the wizard.
･
When PC and FOMA terminal are connected, appears on the stand-by display of the FOMA
terminal.
Removing USB cable
1
Press the USB cable's release buttons on both sides of the connector (
a
) and
remove the connector from FOMA terminal (
b
).
2
Pull the USB cable out from the PC.
INFORMATION
･
Be careful not to give excessive force to the connecter of USB cable when connecting/disconnecting the cable
from FOMA terminal. When disconnecting the connector, be sure to pull it straight while pressing the release
button. Applying an excessive force to disconnect the connector may give damage to it.
･
Do not remove the USB cable during data communication. The data communication is disconnected and it may
cause data loss or malfunction.
Insert with the two
of
▲ marked side
up
Connector
Open the jack
cap
a
b
Release
button
Connector