manualshive.com logo in svg

Dräger Infinity Acute Care System M540, Instructions For Use Manual

Share
Download
Dräger Infinity Acute Care System M540 Instructions For Use Manual Download Page 506

IT applications (options)

506

Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n

Supported IT applications

If you dock a new M540 and admit the patient at the 
Cockpit, the content of some application tabs 
changes to reflect the data of the new patient. 
Similarly, if you discharge a patient, all IT tabs 
reflect that the patient is discharged. The following 
table lists the supported IT applications.

Browser emulation for Internet Explorer 7 to 
Internet Explorer 11 and Microsoft Edge is 
supported in all of the IT tabs except the Application 
tab.

Name of Application

Supported 
software version

Description

Innovian Solution Suite

This application includes:
– Innovian Critical Care 

(formerly known as 
ChartAssist)

– Innovian 

Perioperative Care

 VF7.1

Clinical flow sheet application.

The tab can be configured to display a single patient.

The single patient tab requires that the M540 is docked.

The Innovian waveform feature is not supported with the 
IACS VG5 (or later)

 

release.

Whenever you access the Innovian tab, the local patient 
is displayed or the admit screen is presented if the local 
patient has not yet been admitted to Innovian Solution 
Suite application. For more information, refer to the 
instructions for use 

Innovian Solution Suite

.

Infinity Symphony Suite

VF7

An application that provides retrospective analysis of 
patient data stored on the ICS. The tab can be configured 
to run a single patient provided an M540 is docked. The 
Symphony status page only displays ST-deviations that 
are displayed in the parameter field. 

RemoteView (Gateway 
PatientWatch)

VF6 or higher

Allows you to remotely view up to 4 different bedside 

monitors from the Cockpit.
No wireless symbol (example: 

) appears on the 

PatientWatch screen when the M540 is in wireless mode. 

PatientWatch is supported only in English. 

Application

Citrix XenApp 
server Versions 5, 
6, 6.5

Provides remote access to IT applications residing on the 
Citrix server.

Web browser

Up to Internet 
Explorer 11 and 
MicrosoftEdge

Provides access to HTML and HTML5 content. 

Web application

Up to Internet 
Explorer 11 and 
MicrosoftEdge 

Provides access to HTML and HTML5 content for a single 
URL, including the Citrix Receiver.

Summary of Contents for Infinity Acute Care System M540



































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands