External devices – Evita 2D, Evita 4, Evita XL (Medibus)
438
Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n
To view loops
1
Select the
Sensor parameters...
button on the
main menu bar.
2
Select the
Ventilator
tab. If you cannot see the
tab, select the following two symbols located in
the upper right corner of the dialog:
–
symbol
–
display filter button
3
Select the
PV Loop
tab to view pressure-
volume loops or select the
FV Loop
tab to view
flow-volume loops.
4
Select the
Loops
tab to view all loops in one
dialog.
5
Select the
Loop draw
button at the bottom of
the page to choose how many loops are drawn
on top of each other before the screen is
cleared.
6
Select the
Save reference
button at the bottom
of the page if you want to save a loop for future
analysis and comparison.
The
Show all
page
The
Show all
page displays the values of the
currently monitored ventilator parameters and units
of measure in one screen.
To access the ventilation show all page
1
Select the
Trends/ Data...
button on the main
menu bar.
2
Select
Trends
>
Ventilator
>
Show all
or
1
Select the
Sensor parameters...
button on the
main menu bar.
2
Select the
Ventilator
tab.
3
Select the
Show all
tab.
NOTE
Depending on which devices are connected to the
Cockpit, two
Ventilator
tabs may be displayed. If
you select the
Ventilator
tab and the selected
page has the message
Medibus.X ventilator
devices
displayed as a header, you have
selected the wrong
Ventilator
tab.
NOTE
Depending on which devices are connected to the
Cockpit, two
Ventilator
tabs may be displayed. If
you select the
Ventilator
tab and the selected
page has the message
Medibus.X ventilator
devices
displayed as a header, you have
selected the wrong
Ventilator
tab.
