Dräger Infinity Acute Care System M540 Instructions For Use Manual Download Page 451

Page: 451 / 610

Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n

451

System configuration

Screen setup – configuring views

The

Views

page displays all available views which

control how information is presented on the screen.
The

Views

page consists of custom views and

Dräger views. You can select any view and save
changes to custom views. Dräger views can be
selected, but they cannot be changed.

To save changes to a custom view

Select the

System setup...

button on the main

menu bar.

Select the

Screen setup

tab (if not already

selected).

Select the

Views

tab. A password popup

appears.

Select the view whose name is followed with an
asterisk and appears in italic font (for example,

Basic OR *

). This display convention identifies a

view that has been modified and whose
changes have not yet been saved.

Select the

Save View

button. This button does

not execute any function if you select it and no
custom views are available to be saved.

Press the rotary knob.

Views

NOTE

You can also save changes to a custom View from
the

View editor

page.

Summary of Contents for Infinity Acute Care System M540



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Infinity Acute Care System M540

Reviews:

Brands by name

Popular brands

Dräger Infinity Acute Care System M540, Instructions For Use Manual

Search results

Summary of Contents for Infinity Acute Care System M540

Reviews:

Brands by name

Popular brands