Digi NS9215, Hardware Reference Manual, Page: 506 / 517

T I M I N G
Memory Timing
506
Hardware Reference NS9215
Notes:
1
Active level of SPI enable is inverted (that is, 1) if the CSPOL bit in Serial Channel Control Register B
is set to a 1. Note that in SPI slave mode, only a value of 0 (low enable) is valid; the SPI slave is fixed
to an active low chip select.
2
SPI data order is reversed (that is, LSB last and MSB first) if the BITORDR bit in Serial Channel
Control Register B is set to a 0.
3
T
BCLK
is period of AHB clock.
4
± 5% duty cycle skew.
5
± 10% duty cycle skew.
6
C
load
= 5pf for all outputs.
7
SPI data order can be reversed such that LSB is first. Use the BITORDR bit in Serial Channel
B/A/C/D Control Register A.
SP22 SPI enable low hold from last SPI CLK in
falling 15 ns 0,3 1
SP23 SPI enable low hold from last SPI CLK in
rising 15 ns 1,2 1
SP24 SPI CLK in high time SP26*40% SP26*60% ns 0,1,2,
3 5
SP25 SPI CLK in low time SP26*40% SP26*60% ns 0,1,2,
3 5
SP26 SPI CLK in period T
BCLK
*8 ns 0,1,2,
3
Parm Description Min Max Unit Mod
es Not
es