Anritsu BERTWave MP2100B, Operation Manual, Page: 133 / 382

5-1
5
Generating Pulse Signal
Chapter 5 Generating Pulse Signal
To measure the bit error rate or monitor a waveform, first a signal for
input to the device under test (DUT) must be generated. In these
measurements, a pulse signal with a time cycle is used. This chapter
explains how to generate the pulse pattern signal while setting the output
waveform and data pattern of the PPG.
5.1 List of Setting Items ...................................................... 5-2
5.2 Setting Restrictions ....................................................... 5-9
5.3 Procedure for Generating Pulse Signal ...................... 5-10
5.4 Setting Reference Clock ............................................. 5-11
5.5 Setting Output Waveform ........................................... 5-16
5.6 Setting Patterns .......................................................... 5-20
5.7 Inserting Bit Error ........................................................ 5-25
5.8 Setting Sync Output .................................................... 5-26