Anritsu BERTWave MP2100B, Operation Manual, Page: 62 / 382

Chapter 2 Before Use
2-8
2.2.2 Rear Panel
Figure 2.2.2-1 Rear Panel
*: When the Option 011, 012, or 014 is installed
The following table describes the clock input terminals.
Table 2.2.2-1 Clock Input Terminal List
Name Description Input Range
Ext Clk In For inputting the signal that
sets the bit rate of PPG
The bit rate will be 16 times
the input signal frequency.
0.2 to 1.6 Vp-p
Without the Option 092
531.25 to 707.5 MHz
With the Option 092
390.625 to 781.25 MHz
External 10MHz
Input
For inputting the frequency
reference signal for PPG
0.7 to 2 Vp-p
10 MHz±100 ppm
Inlet
10 MHz Clock Input* GPIB Connector
Serial Number, Option Number Label
External Clock Input*
Functional Ground
Terminal