Anritsu BERTWave MP2100B, Operation Manual, Page: 160 / 382

Chapter 5 Generating Pulse Signal
5-28.
The signal types that can be selected will vary depending on the dividing
ratio displayed in the PPG/ED Bit Rate setting. Sync Output
combinations that can be selected depending on dividing ratio are shown
in the following table. For PPG Ch2 and ED Ch2, Ch3, Ch4, replace PPG1
in the table with PPG2, and ED1 with ED2, ED3, and ED4.
Table 5.8-2 PPG/ED Ch1 Sync Output Combinations
Signal Type
Divide Rate
1/1 1/2 1/4 1/8 1/16 1/32 1/64
PPG1_1/1 Clk – –
    
PPG1_1/2 Clk –
 
– – – –
PPG1_1/4 Clk
 
– – – – –
PPG1_1/8 Clk

– – – – – –
PPG1_1/16 Clk
  
– – – –
PPG1_1/64 Clk

– – – – – –
ED1_1/4 Clk –

– – – – –
ED1_1/8 Clk

– – – – – –
ED1_1/16 Clk
 
– – – – –

: Can be set
–: Cannot be set
Note:
PPG Pattern Sync cannot be set for the following EYE/Pulse Scope
settings.
Time dialog box
Data Clock Rate: Tracking On
Procedures
1. Touch [Sync Output].
2. Select the signal type to be output to Sync Output.