Anritsu BERTWave MP2100B, Operation Manual, Page: 127 / 382

4.4 Multi-channel Signal Output
4-15
4
Screen Oper
ation
4.4 Multi-channel Signal Output
The BERTWave can set PPG channels 1 to 4 and optical transceiver
output to On/Off at the same time.
To output signal of PPG and optical transceiver:
1. Touch [On] as shown in Figure 4.4-1.
2. The characters of [on] are changed to green and then the Output
lamp for the status display is turned on.
Figure 4.4-1 All Outputs Button
The optical signal of the PPG and optical transceiver is output.
To stop the signal output from the PPG and optical transceiver:
1. Touch [off] as shown in Figure 4.4-1.
2. The characters of [on] are changed to white and then the Output
lamp for the status display is turned off.
The data signal output is stopped for all the PPG channels 1 to 4. The
optical output of the optical transceiver is also stopped.
Note:
All Output button is set to [off] after starting the Main Application
at the Selector screen.