Anritsu BERTWave MP2100B, Operation Manual, Page: 86 / 382

Chapter 2 Before Use
2-32
[Network Connections].
 Do not change the Windows [Control Panel] - [Network
Connections] Internal Connection setting. Otherwise, the
BERTWave may not work correctly.
If the IP address has been changed, restore the settings to the
following values.
IP address:
192.168.1.1
Subnet mask: 255.255.255.0
To automatically acquire the Local Area Connection IP address, using
DHCP, set via the Windows [Control Panel]. In this case, [Setup Utility]
will appear as Local Area Connection (DHCP).
The procedure for changing the setting via the Windows [Control Panel]
is as follows.
1. Connect a keyboard and mouse to the BERTWave.
2. Press the Windows key on the keyboard.
If there is no Windows key on the keyboard, press [Ctrl] + [Esc].
3. Click [Control Panel].
4. Double-click
[Network Connections].