Anritsu BERTWave MP2100B, Operation Manual, Page: 217 / 382

7.7 Setting Data Collection Method
7-31
7
Measurin
g W
aveform
Figure 7.7-2 Pulse Mode Display Example
Setting overwritten waveform display
When setting the display method to [Infinite], [Limited] or [Persistency],
the acquired data is overwritten on the screen.
1. Touch [Setup] to open the Setup dialog box.
2. Select the single waveform data collection count from the following
number of samples.
For [Eye]: [509], [1021], [1350], [2039], [4093], [8191], [16381]
For [Pulse], [Coherent Eye]:
[512], [1024], [2048], [4096], [8192], [16384]
When there is only a small amount of captured data, the screen
refresh time is short.
3. Touch the Accumulation Type button, and set the items from the
following lists:
[Infinite]: Unlimited time to overwrite waveform
[Limited]: The waveform is overwritten at the set time until it
reaches the number of data or the numbers of waveforms. Data
collection stops at the set time or when the data count is reached.
[Persistency]: Deletes overwritten data after fixed time elapsed