Anritsu BERTWave MP2100B, Operation Manual, Page: 149 / 382

5.5 Setting Output Waveform
5-17
5
Generating Pulse Signal
Set the bit rate and amplitude of the waveform output to the
Data
and
Data connectors.
Cycle=1/(Bit Rate)
Voltage (V)
0
Amplitude
(V)
Time
Figure 5.5-2 Waveform Setting Item
To set bit rate
Set the bit rate when Reference CLK has been set to [Internal 10MHz] or
[Ext 10MHz In].
1. Touch the Bit Rate button.
The window is opened to select the specifications.
The number of the displayed buttons varies with the options.