Anritsu BERTWave MP2100B, Operation Manual, Page: 65 / 382

2.3 Power Connection
2-11
2
Before Use
2.3.2 Connecting Power Cord
Insert the power plug into an outlet, and connect the other end to the
power inlet on the rear panel. To ensure that the BERTWave is grounded,
always use the supplied 3-pin power cord, and insert the plug into an
outlet with an earth terminal.
WARNING
Always connect the BERTWave to a properly grounded
outlet. Do not use the instrument with an extension cord or
transformer that does not have a ground wire.
If the BERTWave is connected to an ungrounded outlet,
there is a risk of receiving a fatal electric shock. In
addition, the peripheral devices connected to the
BERTWave may be damaged.
Unless otherwise specified, the signal-connector ground
terminal, like an external conductor of the coaxial
connector, of the BERTWave is properly grounded when
connecting the power cord to a grounded outlet. Connect
the ground terminal of DUT to a ground having the same
potential before connecting with the BERTWave. Failure to
do so may result in an electric shock, fire, failure, or
malfunction.
CAUTION
If an emergency arises causing the BERTWave to fail or
malfunction, disconnect the BERTWave from the power
supply by disconnecting either end of the power cord.