Anritsu BERTWave MP2100B, Operation Manual, Page: 155 / 382

5.6 Setting Patterns
5-23
5
Generating Pulse Signal
4. Touch the file name.
5. Touch
[OK].
To cancel file selection, touch the Close button.
6. Touch the button on the right of [Programmable Pattern] to set [POS]
or [NEG].
Note:
If "------------" is displayed in the Programmable Pattern box, a
repeated pattern of “0” and “1” is output.
The BERTWave can read the previous product's pattern file (the file
extension is PCP or PTN). The compatibility with the previous product
file is as shown in the following table.
The file must be saved in the following folder before reading these files.
C:
\
Program Files
\
Anritsu
\
MP2100A
\
MX210000A
\
UserData
\
Pattern