Anritsu BERTWave MP2100B, Operation Manual, Page: 115 / 382

4.1 Screen Configuration
4-3
4
Screen Oper
ation
Table 4.1-1 Application Screen Elements
Name Description
All BER Results Displays the BER measurement results for multiple
channels.
All Measurements Starts and stops up to four channels of error rate
measurement (Options 011, 012, 014) and two
channels of waveform data (Options 021, 023)
sampling at the same time.
All Outputs Sets all PPG (Options 011, 012, 014) channels and
optical transceiver (Option 051) output to On/Off at
the same time.
Ch Tracking Sets the bit rate, test pattern, PPG/ED tracking
function, and gating for all channels to match the
setting for channel 1.
The Ch2 Reference Clk is set to [Ch1].
System Menu The following setting button can be displayed:
 Saving measurement conditions and measurement
results
 Reading measurement conditions
 Saving screen image
 Initializing device settings
 Buzzer
 Confirming system alarm and deleting records
 Setting panel lock
 Enabling panel lock and remote display
 Connection diagram of device internal signal
 Minimizing screen display
 Terminating application
Function Menu Selects the measurement device to be operated.
The displayed measurement device varies depending
on the model name and options.
Status display The following four kinds of the status are displayed:
System: System alarm occurs
Remote: Remotely
controlled
Measure: Measuring bit error rate and obtaining
waveform data of sampling oscilloscope
Output: Signal output from one of the PPG channels
or from the optical transceiver
Measurement screen
display field
Displays the measurement screen selected at the
function menu.
Date/Time display Displays date and time set in the BERTWave.
Version display Displays software version.
Displayed in red if the version has not been updated.
Refer to 10.5 “Updating Software” for details of how to
update the software.