Anritsu BERTWave MP2100B, Operation Manual, Page: 340 / 382

Appendix A Specifications
A-20
Table A.1.3-8 Clock Recovery
Item Specifications
Clock Recovery
(MP2100B-053) CRU Input
Sensitivity: 100 mVp-p*
1
Maximum Amplitude: 2 Vp-p
CRU Output
Connector: SMA jack
Termination: AC coupling, 50
Ω
Amplitude: 0.1 to 2.7 GHz: 270 to 540 mVp-p
8.5 to 12.5 GHz: 500 to 1500 mVp-p
Frequency: 8.5 to 12.5 GHz, 0.1 to 2.7 GHz
Jitter (RMS): 8.5 to 12.5 GHz: 20 mUI or less
*
2
, 10 mUI
*
1,
*
2
0.1 to 2.7 GHz: 5 mUI or less
Loop bandwidth: 8.5 to 12.5 GHz Band:
1, 2, 4, 8 MHz*
3
0.1 to 2.7 GHz Band
2488.32 MHz: 200 kHz*
3
622 MHz: 50 kHz*
3
156 MHz: 20 kHz*
3
Clock Recovery
(MP2100B-054) CRU Input
Connector: Common for O/E Data In (Ch B)
Sensitivity: When option x70 to x82 is installed –9 dBm*
1
When option x86 is installed
9.9 to 10.5 Gbit/s –12 dBm*
1
10.5 Gbit/s or higher –11.4 dBm*
1
Maximum Amplitude:
Before overload –1 dBm or 794
µ
W (average)
+2 dBm or 1.58 mW (peak)
Before damage +5 dBm or 3.16 mW (peak)
The specifications for the following are the same as MP2100B-053:
Clock output, Frequency, Jitter (RMS), Loop bandwidth
Clock Recovery
(MP2100B-055) CRU Input
Connector: Common for ED1 Data CRU In)
Sensitivity, Maximum Amplitude:
Refer to “Sensitivity” and “Amplitude” in Table A.1.2-1.
The specifications for the following are the same as MP2100B-053:
Clock output, Frequency, Jitter (RMS), Loop bandwidth
*1: Typical values
*2: Loop bandwidth: 4 MHz
*3: Nominal values