Anritsu BERTWave MP2100B, Operation Manual, Page: 249 / 382

7.12 Using Marker
7-63
7
Measurin
g W
aveform
7.12 Using Marker
The marker is used to read the amplitude and time values of the
waveform.
Also, the level and time differences between two points can be measured.
There are two markers each for the x- and y-axes. Display of each marker
can be set to on or off separately.
1. Touch [Marker] to display the marker panel.
The marker panel can be moved in the EYE/Pulse Scope window.
2. To display the marker, touch the upper line buttons other than [All
Off].
When the marker is displayed, the lower line buttons are invalid.
3. To move the marker, touch the lower line buttons other than [Center].
The selected marker button is changed to the in-use display, and then
the icon is displayed.
4. Set the marker position using the rotary knob.
The marker position and time/level differences are displayed.
Marker Panel
X1 Off, X1 On, X2 Off, X2 On,
Y1 Off, Y1 On, Y2 Off, Y2 On
Sets marker display
X1, X2, Y1, Y2
Selects marker to be moved
Center
Centers marker in the screen
All Off
Hide all markers
When the measurement result is displayed, touch [
↑
] at the left side of
[Marker] to switch the marker display.