Anritsu BERTWave MP2100B, Operation Manual, Page: 325 / 382

A.1 MP2100B BERTWave
A-5
A
pp
en
dix
A
ppe
ndi
x A
Table A.1.1-3 Data Output
Item Specifications
Number of Channels
*
1
Option 011: 1
Option 012: 2
Option 014: 4
Amplitude 0.1 to 0.8 Vp-p, 10 mV resolution*
2
Accuracy: ±20 mV ±20% for settings
Relative display*
3
: available
Termination AC coupling, 50
Ω
Data Crossing 50%
Accuracy:
±10%*
4
Rise/Fall time Typ.: 24 ps*
4,
*
5
Max.: 28 ps*
4,
*
5
Jitter Jitter (RMS) Typ.: 1 ps*
6,
*
7
Max.: 2 ps*
7,
*
8
Intrinsic RJ (RMS) Typ.: 600 fs*
6,
*
7,
*
9
Max.: 1 ps *
6,
*
7,
*
9
Skew ±15 ps max.*
4
Connector SMA jack
*1: Each channel has both of the Data Output and
Data
Output
connectors, which are for single-ended or differential output.
*2: When without Option 092: At 10.3125 Gbit/s and 11.32 Gbit/s
When with Option 092: At 10.3125 Gbit/s and 12.5 Gbit/s
*3: Value obtained by multiplying “amplitude” by “external attenuation
factor”
*4: When without Option 092:
Bit rate: 11.32 Gbit/s, Amplitude: 0.8 Vp-p
When with Option 092:
Bit rate: 12.5 Gbit/s, Amplitude: 0.8 Vp-p
*5: Time changing between 20 to 80% amplitude
*6: When using an oscilloscope having residual jitter of <200 fs (RMS)
and a clock with SSB phase noise of –102dBc/Hz or less at an offset
of 100 kHz, in the temperature range of 20 to 30°C
*7: Amplitude: 0.4 Vp-p, Bit rate: 10.3125 Gbit/s
*8: When using an oscilloscope having residual jitter of <1 ps (RMS)
*9: Pattern setting: Alternate ones and zeroes