Anritsu BERTWave MP2100B, Operation Manual, Page: 75 / 382

2.9 Turning Power On/Off
2-21
2
Before Use
The Selector screen buttons execute the following processing:
[Main Application]: Displays the application screen where you can
configure settings for the PPG, ED, sampling
oscilloscope, and optical interface and view the
measurement results.
For details on how to use the screen, refer to the
following chapters:
 Chapter 4, Screen Operation
 Chapter 5, Generating Pulse Signal
 Chapter 6, Measuring Bit Error
 Chapter 7, Observing Waveform
 Chapter 8, Operating Optical Interface
[Setup Utility]: Displays the setup window where you can configure the
remote interface, view the configuration and version of
the software and update the software.
[Exit]: Displays Windows Explorer where you can work with
files saved by the Main Application.
[Shut down]: Shuts down the power.
2.9.2 Power-off
Turning off the power in the Selector screen
1. Touch [System Menu] in the application screen.
2. Touch
[Exit].
3. Touch [Yes], and the selector screen appears.
4. Touch [Shut Down] at the Selector screen.
5. In the Confirm Shutdown dialog box, touch the [OK] button to quit
Windows.
The green Power switch lamp goes off, the standby lamp lights
orange, and the power is turned off.
Turning off the power by shutting down Windows
1. Touch [Main Application] at the Selector screen.
2. The measurement screen is displayed, and then touch [System
Menu] on the upper-right of the screen.
3. Touch [Minimize].
4. Touch [Start] menu of the Windows task bar.
5. Touch
[Shut Down].
6. Confirm that [Shut Down] is displayed and touch [OK].
7. The green Power switch lamp goes off, the sand by lamp lights
orange, and the power is turned off.