Anritsu BERTWave MP2100B, Operation Manual, Page: 80 / 382

Chapter 2 Before Use
2-26
2.12 Using External Monitor
When using a DVI connector
You don’t need to make any settings when using a DVI connector to
connect the BERTWave to an external monitor. When the external
monitor is connected with the DVI connector, the BERTWave screen will
be displayed on the external monitor.
When using a VGA connector
This section explains how to display the BERTWave screen on the
external monitor.
1. Connect the external monitor to the monitor connector on the left
side panel of the BERTWave.
2. Set the BERTWave and monitor power to On.
3. Touch [Main Application] at the Selector screen.
4. Touch [System Menu].
5. Touch
[Minimize].
6. Touch [Start] on the right bottom of the screen.
7. Touch [Control Panel].
8. Touch [Intel(R) GMA Driver for Module] twice to display the
following monitor setting screen.
9. Touch [Operating Mode], and then touch [Intel(R) Dual Display
Clone].
10. Touch [Display Setting].
11. Touch [Monitor].