Anritsu BERTWave MP2100B, Operation Manual, Page: 84 / 382

Chapter 2 Before Use
2-30
2.14.2 To set GPIB
1. In the Active Interface area of the Remote Control window, touch the
button to change the button name to GPIB.
If the Option 030 is not installed, GPIB is not displayed.
2. Touch the GPIB Address text box. A dialog box for inputting the
address is displayed.
3. Enter the GPIB address from 1 to 30.
4. Touching the [Apply] button completes the settings.
Touching the [Exit] button deletes the settings made at steps 3 and
4.
5. Touching the [Protect] button protects the GPIB address value from
being edited easily. Use this button as required.