ABB TCC300, User Manual, Page: 99 / 716

3.15 Resettable operation counter
3.15.1 Resetting operation counter from the HMI
1. Navigate to the "Resettable Counter" screen in the Monitor/Tap Information menu.
2. Press the ENT pushbutton. The displayed "E" will change to a "R", then press ENT
again.
3. Press the ENT pushbutton. The control will display the following.
Resettable Counter 0
The Operation Counter is now reset.
4. Press the Exit pushbutton to return to the "Tap Information" screen.
3.15.2 Resetting operation counter from TCC600
1. Select Setup/Tap Settings from the TCC600 toolbar. TCC600 will display the Tap
Settings dialog screen.
2. From the "Operation Counter" section of the Tap Settings dialog screen select the
"Reset" for the "Resettable" parameter.
3. Select Save . TCC600 will display a "Save to Device" confirmation screen.
4. Select OK . TCC600 will display a Setpoints "Successfully Written to Control"
confirmation screen.
The Operations Counter value will be reset to zero.
3.16 Tap statistics
3.16.1 Viewing specific tap statistics from the HMI
1. Navigate to the View Specific Tap Statistics screen in the Monitor/Tap Information
menu.
2. Press the ENT pushbutton. The control will display the number of recorded
tapchanges and the Accumulated Primary Current for each individual tap position on
the Tapchanger control.
3. The Up and Down arrow pushbuttons are utilized to scroll through the tap positions.
Press the Exit pushbutton to exit Tap Stats.
1VAC388793-MB A
Section 3
Operation
TCC300 93
User Manual